Print settings
Select this setting item from Printer settings in (Setup).
• Prevent paper abrasion•
Use this setting only if the print surface becomes smudged.
Important
• Be sure to set this back to OFF after printing since it may result in lower printing speed or lower•
print quality.
• Adjust horizontal print position•
Adjusts the print position when the left/right margins are not aligned.
You can adjust the left/right margins in increments of 0.004 in. (0.1 mm) between -0.12 in. (-3 mm) and
+0.12 in. (+3 mm) centered on the horizontal center of the paper.
Important
• When using A4/Letter sized paper, the amount of adjustment that can be made is limited. You•
cannot make adjustments greater than this limit.
• Print target for plain paper•
Select Text only or Text and photos for plain paper printing.
Note
• As print results, if you are conscious of unevenness or textures of granularity, select Text and•
photos.
• Print charts and diagrams vividly•
Use this setting when you want to print charts and diagrams in documents vividly on plain paper.
This feature gives preference to printer driver settings.
When you want to give preference to printer settings, select Use Printer Settings in the Print charts
and diagrams in documents more vividly (plain paper) in Print Options dialog box in the printer
driver settings below.
Page Setup Tab Description
Note
• This feature will be implemented with the following settings.•
Plain paper
Color printing
Size is a template size or a user-defined size within the range of a template size
* The feature may not be implemented even when the above settings are selected, depending on
other setting details.
182
To Next Page
Loading...
Need help?
General