User management settings
The administrator makes settings to manage users.
Important
• The administrator password may be required to change the settings.•
1.
Check that printer is turned on.
1.
2.
Select Setup on the HOME screen.
2.
Using Touch Screen
The setup menu screen will appear.
3. Select Printer settings.3.
The Printer settings screen is displayed.
4. Select User management settings.4.
Enable/disable user management
Set the valid/invalid of the administration of the user registered by the remote UI.
1. Select ON.1.
2. Select Log in.2.
Auto logout time
When the operation is not performed by the registered user, set the time to log out automatically.
Select Auto logout time, and set the time.
198
To Next Page
Loading...
Need help?
General