(Signal strength: 51 % or more): The problem such as the printer cannot print may occur
according to the network status. We recommend placing the printer near the wireless router.
(Signal strength: 50 % or less): The problem such as the printer cannot print may occur.
Place the printer near the wireless router.
Wi-Fi is enabled but the printer is not connected to the wireless router.
Wireless Direct is enabled.
Network is disabled.
C: Wireless connect
Select to connect the printer to a smartphone/tablet over Wi-Fi through Easy wireless connect.
Tap this button to display a confirmation screen for starting a connection.
Easy wireless connect
The printer has been already put into the standby mode for easy wireless connect and smartphone
when a is displayed.
D: Setup
Displays the printer's setting menus or the maintenance menus.
(NEW) appears when there is an information from PIXMA/MAXIFY Cloud Link.
Using PIXMA/MAXIFY Cloud Link
E: Hint
Displays quick guides about such procedures as loading paper and troubleshooting and such
information as estimated ink level and system information.
If you set Notification settings to Enable, (NEW) is displayed when notification is sent to
Canon.
Notification settings
Note
•
For details on how to change settings, refer to Changing Settings from Operation Panel.
•
Basic Operation of the touch screen
Touch the touch screen lightly with your finger tip or move your finger to access various functions or
settings.
52
To Next Page
Loading...
Need help?
General