Check 5
If brightness is set low, increase brightness setting and try printing again.
If you are printing with a low brightness setting on plain paper, the paper may absorb too much ink and become
wavy, causing paper abrasion.
• Printing from your computer (Windows)•
Check the brightness setting in the Printer Driver.
Adjusting Brightness
Check 6
Is platen glass or ADF scan helper dirty?
Clean the platen and surrounding.
Cleaning Platen and Document Cover
Cleaning the ADF (Auto Document Feeder)
Check 7
Is paper feed roller dirty?
Clean paper feed roller.
Cleaning Paper Feed Rollers
Note
•
Cleaning the paper feed roller abrades it, so do this only when necessary.
•
Check 8
Is inside of printer dirty?
During 2-sided printing, ink may stain the inside of the printer, smudging the printout.
Perform bottom plate cleaning to clean inside of printer.
Cleaning Inside the Printer (Bottom Plate Cleaning)
Note
•
To prevent staining inside the printer, be sure to set the correct paper size.
Check 9
Set longer ink drying time.
This allows the printed surface to dry, preventing smudges and scratches.
•
For Windows:
•
Set the waiting time using Remote UI.
1. Open Remote UI on the web browser of your device.1.
Configuration Changes / Display Printer Status Using Web Browser
2.
Select Log in on Remote UI.
2.
Note
•
If you specify the administrator password, enter the password.
3.
Select Printer settings.
3.
603
To Next Page
Loading...
Need help?
General