Note: The keyboard backlight turns off when the display backlight dims or the Surveyor2 is
suspended.
DISPLAY AND TOUCHSCREEN
The Surveyor2 has a bright color display and capacitive touchscreen with a diagonal viewing area
of 4.2 inches (107 mm). It is easy to view outdoors and is sealed against water and dust. The
Windows® Embedded Handheld operating system enhances the ability of the Surveyor2 to
recognize touch gestures, making it easy to use a finger to make selections and navigate. You can
also use a capacitive stylus.
DISPLAY AND TOUCHSCREEN SETTINGS
TYPE AND ORIENTATION
To adjust the display settings, including the text size and orientation, go to the Screen control
panel by pressing Start > Settings> System > Screen.
The screen is designed to be used in landscape orientation.
Note: Capacitive touchscreens do not need to be aligned.
TOUCHSCREEN MODES
The touchscreen is optimally designed for finger use. The default touchscreen mode can be
adjusted to best match your application and environment, especially if you are using a capacitive
stylus.
To adjust the touchscreen profile, go to the Touch control panel by pressing Start > Settings >
System > Touch. Modes for finger, stylus or water use are shown.
To Next Page
Loading...
Need help?
General
