WI-FI WIRELESS NETWORKING
The Surveyor2 has built-in Wi-Fi wireless networking to connect to the Internet or a office
network.
CONNECTING TO A WI-FI NETWORK
To use Wi-Fi, you need to be in range of a Wi-Fi access point to make a connection. To actively
look for a network connection, complete the following steps:
1. From the Home screen, turn Wi-Fi on by selecting the Wi-Fi gadget . The Surveyor2
automatically starts scanning the area for available Wi-Fi networks. (If the Wi-Fi gadget is
not on the Home screen, open the Start screen, and select Getting Started. Select Set up
Wi-Fi or press Start > Settings > Connections > Wireless Manager.)
2. Tap-hold the Wi-Fi icon on the Home screen to go to the Wi-Fi control panel. When the
handheld completes the scan, a list of available networks and their strengths appears on
the Wi-Fi Wireless screen. Click on the Search for Networks button if none are
automatically listed.
To Next Page
Loading...
Need help?
General
