Some keys have an extra character bar that includes items like accented characters or additional
symbols. These keys have three dots in the bottom right corner like the z key . Press and hold
the key to bring up the extra bar. Tap the desired item or dismiss the bar by tapping outside of the
bar.
A calculator is available from the numeric screen. Press the Calc key to launch the calculator
application.
The backspace and the space keys can be repeated by pressing and holding those keys.
Suspend, RESET, Power Off, and Restore Defaults
Use the power key to suspend, reset, power off, or restore the Surveyor2 to its factory state. To
access the Power Key menu, press and hold the power key.
SUSPENDING AND RESUMING THE SURVEYOR2
We recommend you suspend your handheld when it is not in use for a day or two.
Suspending the handheld is different from powering it off. When the device is suspended it goes
into a low power mode. Some battery power is used during suspend.
1. Press and release the power key or select the Suspend option on the Power Key menu.
The backlight shuts off. It can take several seconds to fully suspend. When the cell modem
is on, in can take up to 45 seconds.
2. The green LED turns on during the suspend process and goes off once it is completely
suspended to let you know it has finished suspending.
3. To resume the device from suspend mode, press and release the power key again. When
it is resumed, the handheld resumes where it was before it was suspended.
RESETTING THE SURVEYOR2