Cessna 150M - Page 36

22. Starter brushes, brush leads and commutator
23. Alternator and electrical connections. . . .
24. Alternator brushes, brush leads and commutator or slip ring
25. Voltage regulator mounting and electrical leads .
26. Magnetos
(externally) and electrical connections.
27. Magneto timing
28. Carburetor and drain plug .
29. Firewall
30. Engine cowling.
FUEL SYSTEM
1. Fuel strainer, drain valve and control
2. Fuel strainer screen and bowl . . .
3.
Fuel tank vents, caps and placards.
4. Fuel tanks, sump drains and fuel line drains
5. Drain fuel and check tank interior, attachment and outlet screens
6. Fuel vent valves . .
7.
Fuel vent line drain.
8. Fuel shut-off valve and placards
9. Fuel valve drain plug
10. Engine
primer ...
LANDING GEAR
1.
Main gear wheels and fairings
2. Nose gear wheel, torque links, steering rods, boots and fairing.
3.
Wheel bearings.
4. Nose gear strut and shimmy dampener (service as required)
5.
Tires ...
6. Brake fluid, lines and hoses, linings, discs, brake assemblies
and master cylinders .
7. Parking brake system.
8. Main gear springs
2-22 Change 1
SPECIAL INSPECTION ITEM
EACH 200 HOURS
EACH 100 HOURS
EACH 50 HOURS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
7
8
5
9