Programmable DC Electronic Load 63600 Series Operation & Programming Manual
Address via DHCP.
e. Not Properly Set : The network setting is wrong.
Once the setting is successful, the panel will show the updated network setting automatically
and clear the status message.
STEP 4:
Save the settings and exit the CONFIGURE page completely for 63600 to save them
correctly.
5.1.4.3 Confirming Network Connection is Successful
When the above actions are done, it indicates the local area network is set including the
Chroma DC Load 63600 network card. Now, users need to confirm the set local area
network is correct. Follow the steps below for verification.
STEP 1:
Click “start” from the Windows desktop and click “Run.”
To Next Page
Loading...
Need help?
General
