Programmable DC Electronic Load 63600 Series Operation & Programming Manual
Please refer to the following figure.
1. (root):VOLT:L1: 30<nl>
Starting a New Line to return to the Root.
2. (root):SPEC:VOLT:H 30;
:L 5;:
(root):RES:L1 400;
:RISE 1000;:
5.3 Language Dictionary
Commands for operating the 63600 Electronic Load remotely are grouped into subsystems.
Each command that belongs to the same subsystem is arranged in alphabetic order. A
syntax chart of the subsystem that contains the commands in the same group is included.
Sub- systems are ordered alphabetically according to their names in the following sections.
5.3.1 Common Commands
The common commands defined by IEEE488.2 standard are generic commands and queries.
The first part of the language dictionary covers the commands. Each of them has a leading
“*”.
To Next Page
Loading...
Need help?
General
