Chroma 63600-2 User Manual

Programmable DC Electronic Load 63600 Series Operation & Programming Manual
5-36
For example, if <yy…y> = 20002 and <ww> = 01, then <x> = 7 and
<byte1><byte2><byte3>…<byte20000><Chksum Low byte><Chksum High byte>
Setting Example:ADV:USER:WAV:DATA:POIN “#70120002xxxxxxxxxxxxxx…….xxxcc”
Query Syntax: [ADVance:]USER:WAVeform:DATA:POINt?<space><NR1>
Return Parameters: <NR1>, 0 ~ 120000
Query Example: USER:WAV:DATA:POIN?
[ADVance:]USER:WAVeform:DATA:STATus?
Type: Frame-Specific
Description: This command returns the status of waveform data download.
Setting Syntax: None
Setting Parameters:None
Query Syntax: [ADVance:]USER:WAVeform:DATA:STATus?
Return Parameters:<NR1>
0：Idle
1：Wait Processing
2：Finish
3：Data Format Error
4：Data Length Error
5：Over limit of waveform data
6：ChkSum Error
Query Example: USER:WAV:STAT?
[ADVance:]USER:WAVeform:EXEcute:STATus?
Type: Channel-Specific
Description: This command returns the status of waveform data download.
Setting Syntax: None
Setting Parameters:None
Query Syntax: [ADVance:]USER:WAVeform:EXEcute:STATus?
Return Parameters:<NR1>,
0：Idle
1：Running
2：Finish
3：Stop
Query Example: USER:WAV:EXE:STAT?
Return Example: 1
[ADVance:]USER:WAVeform:REMain?[<space><NR1>]
Type: Channel-Specific
Description: This command returns the remains waveform data of unused.
Setting Syntax: None
Setting Parameters:None
Query Syntax: [ADVance:]USER:WAVeform:REMain?[<space><NR1>]
Query Parameters: <NR1>, 1 ~ 10, Resolution = 1, Unit = None, 1~10:Waveform 1~10
Return Parameters:<NR1>, 0 ~ 120000
Query Example: ADV:USER:WAV:REM? Return total remain points.
ADV:USER:WAV:REM? 1 Return waveform #1 remain points.

Chroma 63600-2 Specifications

General

Brand	Chroma
Model	63600-2
Category	Power Supply
Language	English