Contents
x
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
CHAPTER
7 Setting Up and Managing User Accounts 7-1
User Setup Features and Functions 7-2
About User Databases 7-2
Basic User Setup Options 7-4
Adding a Basic User Account 7-5
Setting Supplementary User Information 7-7
Setting a Separate CHAP/MS-CHAP/ARAP Password 7-8
Assigning a User to a Group 7-9
Setting User Callback Option 7-10
Assigning a User to a Client IP Address 7-11
Setting Network Access Restrictions for a User 7-12
Setting Max Sessions Options for a User 7-16
Setting User Usage Quotas Options 7-18
Setting Options for User Account Disablement 7-20
Assigning a PIX ACL to a User 7-21
Advanced User Authentication Settings 7-22
TACACS+ Settings (User) 7-22
Configuring TACACS+ Settings for a User 7-23
Configuring a Shell Command Authorization Set for a User 7-25
Configuring a PIX Command Authorization Set for a User 7-28
Configuring Device Management Command Authorization for a User 7-30
Configuring the Unknown Service Setting for a User 7-32
Advanced TACACS+ Settings (User) 7-33
Setting Enable Privilege Options for a User 7-33
Setting TACACS+ Enable Password Options for a User 7-35
Setting TACACS+ Outbound Password for a User 7-36
RADIUS Attributes 7-37
Setting IETF RADIUS Parameters for a User 7-38
Setting Cisco IOS/PIX RADIUS Parameters for a User 7-39
Setting Cisco Aironet RADIUS Parameters for a User 7-40
To Next Page
Loading...
