7-35
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 7 Setting Up and Managing User Accounts
Advanced User Authentication Settings
c. Click Add Association.
Result: An entry appears in the table, associating the device group with a
particular privilege level.
d. Repeat Step a through Step c for each device group you want to associate to
this user.
Tip To delete an entry, select the entry and then click Remove Associate.
Step 5 Do one of the following:
• If you are finished configuring the user account options, click Submit to
record the options.
• To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
Setting TACACS+ Enable Password Options for a User
When setting the TACACS+ Enable Password Options for a user, you have three
options to chose from:
• Use CiscoSecure PAP password
• Use external database password
• Use separate password
To set the options for the TACACS+ Enable password, follow these steps:
Step 1 Perform Step 1 through Step 3 of Adding a Basic User Account, page 7-5.
Result: The User Setup Edit page opens. The username being added or edited is
at the top of the page.
To Next Page
Loading...
