Chapter 8 Establishing Cisco Secure ACS System Configuration
RDBMS Synchronization
8-42
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Note The database user account specified by the username must have
sufficient privileges to read and write to the accountActions table.
• Password—Specifies the password Cisco Secure ACS uses to access the
database that contains the accountActions table.
Synchronization Scheduling Options
The RDBMS Synchronization feature provides the following scheduling options:
• Manually—Cisco Secure ACS does not perform automatic RDBMS
synchronization.
• Every X minutes—Cisco Secure ACS performs synchronization on a set
frequency. The unit of measurement is minutes, with a default update
frequency of 60 minutes.
• At specific times...—Cisco Secure ACS performs synchronization at the
time specified in the day and hour graph. The minimum interval is one hour,
and the synchronization takes place on the hour selected.
Synchronization Partners Options
The RDBMS Synchronization feature provides the following synchronization
partners options:
• AAA Server—This list represents the AAA servers configured in the AAA
Servers table in Network Configuration for which the Cisco Secure ACS does
not perform RDBMS synchronization.
• Synchronize—This list represents the AAA servers configured in the AAA
Servers table in Network Configuration for which the Cisco Secure ACS does
perform RDBMS synchronization.
For more information about the AAA Servers table in Network Configuration, see
AAA Server Configuration, page 4-20.
To Next Page
Loading...
