Chapter 8 Establishing Cisco Secure ACS System Configuration
IP Pools Server
8-66
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Deleting an IP Pool
Note If you delete an IP pool that has users assigned to it, those users cannot
authenticate until you edit the user profile and change their IP assignment
settings. Alternatively, if the users receive their IP assignment based on group
membership, you can edit the user group profile and change the IP assignment
settings for the group.
To delete an IP pool, follow these steps:
Step 1 In the navigation bar, click System Configuration.
Step 2 Click IP Pools Server.
Result: The AAA Server IP Pools table lists any IP pools you have configured,
their address ranges, and the percentage of pooled addresses in use.
Step 3 Click the name of the IP pool you need to delete.
Result: The name pool table appears, where name is the name of the IP pool you
selected. The In Use column displays how many IP addresses in this pool are
assigned to a user. The Available column displays how many IP addresses are not
assigned to users.
Step 4 Click Delete.
Result: Cisco Secure ACS displays a dialog box to confirm that you want to delete
the IP pool.
Step 5 To delete the IP pool, click OK.
Result: The IP pool is deleted. The AAA Server IP Pools table does not list the
deleted IP pool.
To Next Page
Loading...
Need help?
General