D-27
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Appendix D Cisco Secure ACS Command-Line Database Utility
Recalculating CRC Values
Step 2 Type:
CSUtil.exe -e -number
where number is the error number found in the Cisco Secure ACS service log.
Press Enter.
Note The hyphen (-) before number is required.
Result: CSUtil.exe displays the text message equivalent to the error number
specified.
Recalculating CRC Values
The -c option is for use by the TAC. Its purpose is to resolve CRC (cyclical
redundancy check) value conflicts between files manually copied into your
Cisco Secure ACS directories and the values recorded in the Windows Registry.
Note Do not use the -c option unless a Cisco representative requests that you do.
User-Defined RADIUS Vendors and VSA Sets
This section provides information and procedures about user-defined RADIUS
vendors and VSAs. It contains the following topics:
• About User-Defined RADIUS Vendors and VSA Sets, page D-28
• Adding a Custom RADIUS Vendor and VSA Set, page D-28
• Deleting a Custom RADIUS Vendor and VSA Set, page D-30
• Listing Custom RADIUS Vendors, page D-31
• Exporting Custom RADIUS Vendor and VSA Sets, page D-32
• RADIUS Vendor/VSA Import File, page D-33
To Next Page
Loading...
Need help?
General