4-25
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 4 Setting Up and Managing Network Configuration
AAA Server Configuration
Step 10 To save your changes and apply them immediately, click Submit + Restart.
Tip To save your changes and apply them later, click Submit. When you are ready to
implement the changes, click System Configuration, click Service Control, and
then click Restart.
Note Restarting the service clears the Logged-in User report and temporarily
interrupts all Cisco Secure ACS services. This affects the Max Sessions
counter and resets it to zero.
Editing a AAA Server
Use this procedure to edit the settings for a AAA server that you have previously
configured.
Note You cannot edit the name of a AAA server. To rename a AAA server, you must
delete the existing AAA server and then add a new server entry with the new
name.
Before You Begin
For descriptions of the options available while editing a remote AAA server
configuration, see AAA Server Configuration Options, page 4-21.
For Cisco Secure ACS to provide AAA services to a remote AAA server, you
must ensure that gateway devices between the remote AAA server and
Cisco Secure ACS permit communication over the ports that support the
applicable AAA protocol (RADIUS or TACACS+). For information about ports
used by AAA protocols, see “AAA Protocols—TACACS+ and RADIUS” section
on page 1-6.
To Next Page
Loading...
Need help?
General