9-19
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 9 Working with Logging and Reports
Working with ODBC Logs
Working with ODBC Logs
This section contains procedures for the following topics:
• Preparing for ODBC Logging, page 9-19
• Configuring a System Data Source Name for ODBC Logging, page 9-20
• Configuring a CSV Log, page 9-16
Preparing for ODBC Logging
To prepare for ODBC logging, there are several steps you must complete. After
you have prepared for ODBC logging, you can configure individual ODBC logs.
To prepare for ODBC logging, follow these steps:
Step 1 Set up the relational database to which you want to export logging data. For more
information, refer to your relational database documentation.
Step 2 Set up a system data source name (DSN) on the Cisco Secure ACS server. For
instructions, see Configuring a System Data Source Name for ODBC Logging,
page 9-20.
Step 3 Enable ODBC logging in the Cisco Secure ACS HTML interface:
a. In the navigation bar, click Interface Configuration.
b. Click Advanced Options.
c. Select the ODBC Logging check box.
d. Click Submit.
Result: Cisco Secure ACS enables the ODBC logging feature. On the
Logging page, in the System Configuration section, Cisco Secure ACS
displays links for configuring ODBC logs.
Result: You can now configure individual ODBC logs. For instructions, see
Configuring an ODBC Log, page 9-20.
To Next Page
Loading...
Need help?
General