Chapter 8 Establishing Cisco Secure ACS System Configuration
VoIP Accounting Configuration
8-68
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
VoIP Accounting Configuration
The VoIP Accounting Configuration feature enables you to specify which
accounting logs receive VoIP accounting data. There are three options for VoIP
accounting:
• Send to both RADIUS and VoIP Accounting Log
Targets—Cisco Secure ACS appends VoIP accounting data to the RADIUS
accounting data and logs it separately to a CSV file. To view the data, you can
use either RADIUS Accounting or VoIP Accounting under Reports and
Activity.
• Send only to VoIP Accounting Log Targets—Cisco Secure ACS only logs
VoIP accounting data to a CSV file. To view the data, you can use VoIP
Accounting under Reports and Activity.
• Send only to RADIUS Accounting Log Targets—Cisco Secure ACS only
appends VoIP accounting data to the RADIUS accounting data. To view the
data, you can use RADIUS Accounting under Reports and Activity.
Configuring VoIP Accounting
Note The VoIP Accounting Configuration feature does not enable VoIP accounting. To
enable VoIP accounting, see Chapter 9, “Working with Logging and Reports.”
To configure VoIP accounting, follow these steps:
Step 1 In the navigation bar, click System Configuration.
Step 2 Click VoIP Accounting Configuration.
Note If this feature does not appear, click Interface Configuration, click
Advanced Options, and then select the Voice-over-IP (VoIP)
Accounting Configuration check box.
Result: The VoIP Accounting Configuration page appears. The Voice-over-IP
(VoIP) Accounting Configuration table displays the options for VoIP accounting.
To Next Page
Loading...
Need help?
General