F-3
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Appendix F RDBMS Synchronization Import Definitions
accountActions Specification
accountActions Mandatory Fields
For all actions, the following three fields cannot be empty and must have a valid
value:
• Action
• DateTime
• SequenceID
In addition to the three required fields above, the UserName and GroupName
fields are also often required to have a valid value:
• If a transaction is acting upon a user account, a valid value is required in the
UserName field.
• If a transaction is acting upon a group, a valid value is required in the
GroupName field.
• If a transaction is acting upon AAA client configuration, neither the
UserName field nor the GroupName field require a value.
Note The UserName and GroupName fields are mutually exclusive; only one of these
two fields can have a value and neither field is always required.
ComputerNames CN String 32 RESERVED by CSDBSync.
AppId AI String 255 The type of configuration parameter to
change.
Status S Number 32 TRI-STATE: 0=not processed, 1=done,
2=failed. This should normally be set to 0.
Table F-1 accountActions Fields (continued)
Field Name Mnemonic Type Size Comments
To Next Page
Loading...
