8-41
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 8 Establishing Cisco Secure ACS System Configuration
RDBMS Synchronization
Step 6 Complete the other fields required by the ODBC driver you selected. These fields
may include information such as the IP address of the server on which the
ODBC-compliant database runs.
Step 7 Click OK.
Result: The name you assigned to the DSN appears in the System Data Sources
list.
Step 8 Close the ODBC window and Windows Control Panel.
Result: The system DSN to be used by Cisco Secure ACS to access your
accountActions table is created on your Cisco Secure ACS.
RDBMS Synchronization Options
The RDBMS Synchronization Setup page, available from System Configuration,
provides control of the following items:
• RDBMS Setup Options, page 8-41—Defines how Cisco Secure ACS
accesses the accountActions table.
• Synchronization Scheduling Options, page 8-42—Defines when
synchronization occurs.
• Synchronization Partners Options, page 8-42—Defines which
Cisco Secure ACSes are synchronized with data from the accountActions
table.
RDBMS Setup Options
The RDBMS Synchronization feature provides the following RDBMS setup
options:
• Data Source—Specifies which of all the system DSNs available on the
Cisco Secure ACS is to be used to access the accountActions table.
• Username—Specifies the username Cisco Secure ACS should use to access
the database that contains the accountActions table.
To Next Page
Loading...
Need help?
General