Chapter 8 Establishing Cisco Secure ACS System Configuration
CiscoSecure Database Replication
8-24
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Step 8 Click Submit.
Result: Cisco Secure ACS saves the replication configuration, and at the
frequency or times you specified, Cisco Secure ACS begins accepting the
replicated components from the other Cisco Secure ACSes you specified.
Replicating Immediately
You can manually start database replication.
Note Replication cannot occur until you have configured at least one secondary
Cisco Secure ACS. For more information about configuring a secondary
Cisco Secure ACS, see Configuring a Secondary Cisco Secure ACS, page 8-21.
Before You Begin
For each secondary Cisco Secure ACS that this Cisco Secure ACS is to send
replicated components to, ensure that you have completed the steps in
Configuring a Secondary Cisco Secure ACS, page 8-21.
Ensure correct configuration of the AAA Servers table in the primary
Cisco Secure ACS. This primary Cisco Secure ACS must have an accurately
configured entry in its AAA Servers table for each of its secondary
Cisco Secure ACSes. For more information about the AAA Servers table, see
AAA Server Configuration, page 4-20.
To initiate database replication immediately, follow these steps:
Step 1 Log in to the HTML interface on the primary Cisco Secure ACS.
Step 2 In the navigation bar, click System Configuration.
To Next Page
Loading...
Need help?
General