4-17
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 4 Setting Up and Managing Network Configuration
AAA Client Configuration
Step 7 From the Authenticate Using list, select the network security protocol used by the
AAA client.
Tip If you are uncertain which protocol to select on the Authenticate Using
list, see AAA Client Configuration Options, page 4-11.
Step 8 To enable a single connection from a AAA client, rather than a new one for every
TACACS+ request, select the Single Connect TACACS+ AAA Client (Record
stop in accounting on failure) check box.
Note If TCP connections between Cisco Secure ACS the AAA client is
unreliable, do not use this feature.
Step 9 To enable logging of watchdog packets, select the Log Update/Watchdog
Packets from this AAA Client check box.
Step 10 To enable logging of RADIUS tunneling accounting packets, select the Log
RADIUS tunneling Packets from this AAA Client check box.
Step 11 To save your changes and apply them immediately, click Submit + Restart.
Note Restarting the service clears the Logged-in User report and temporarily
interrupts all Cisco Secure ACS services. This affects the Max Sessions
counter.
Tip To save your changes and apply them later, click Submit. When you are ready to
implement the changes, click System Configuration, click Service Control, and
then click Restart.
To Next Page
Loading...
Need help?
General