Chapter 5 Setting Up and Managing Shared Profile Components
Network Access Restrictions
5-12
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Step 4 To edit the Name or Description of the filter, type and delete information, as
applicable.
Step 5 To edit a line item in the IP-based access restrictions table, follow these steps:
a. Double-click the line item that you want to edit.
Result: Information for the line item is removed from the table and written to
the boxes below the table.
b. Edit the information, as applicable.
c. Click enter.
Result: The edited information for this line item is written to the IP-based
access restrictions table.
Step 6 To remove a line item from the IP-based access restrictions table, follow these
steps:
a. Select the line item.
b. Below the table, click remove.
Result: The line item is removed from the IP-based access restrictions table.
Step 7 To edit a line item in the CLI/DNIS access restrictions table, follow these steps:
a. Double-click the line item that you want to edit.
Result: Information for the line item is removed from the table and written to
the boxes below the table.
b. Edit the information, as applicable.
c. Click enter.
Result: The edited information for this line item is written to the CLI/DNIS
access restrictions table.
Step 8 To remove a line item from the CLI/DNIS access restrictions table, follow these
steps:
a. Select the line item.
b. Below the table, click remove.
Result: The line item is removed from the CLI/DNIS access restrictions table.
To Next Page
Loading...
Need help?
General