7-19
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
Chapter 7 Setting Up and Managing User Accounts
Basic User Setup Options
as with ISDN, the quota is not updated until all sessions terminate, which means
that a second channel will be accepted even if the first channel has exhausted the
quota allocated to the user.
To set usage quota options for a user, follow these steps:
Step 1 Perform Step 1 through Step 3 of Adding a Basic User Account, page 7-5.
Result: The User Setup Edit page opens. The username being added or edited is
at the top of the page.
Step 2 In the Usage Quotas table, select Use these settings.
Step 3 To define a usage quota based on duration of sessions for a user, follow these
steps:
a. Select the Limit user to x hours of online time check box.
b. Type the number of hours (up to 10 characters) to which you want to limit the
user in the Limit user to x hours of online time box. Use decimal values to
indicate minutes. For example, a value of 10.5 would equal 10 hours and 30
minutes.
c. Select the period for which you want to enforce the time usage quota:
• per Day—From 12:01 a.m. until midnight.
• per Week—From 12:01 a.m. Sunday until midnight Saturday.
• per Month—From 12:01 a.m. on the first of the month until midnight on
the last day of the month.
• Absolute—A continuous, open-ended count of hours.
Step 4 To define usage quotas based on the number of sessions for a user, follow these
steps:
a. Select the Limit user to x sessions check box.
b. Type the number of sessions (up to 10 characters) to which you want to limit
the user in the Limit user to x sessions box.
c. Select the period for which you want to enforce the session usage quota:
• per Day—From 12:01 a.m. until midnight.
• per Week—From 12:01 a.m. Sunday until midnight Saturday.
To Next Page
Loading...
