Appendix F RDBMS Synchronization Import Definitions
Action Codes
F-18
User Guide for Cisco Secure ACS for Windows Server
78-14696-01, Version 3.1
150 SET_STATIC_IP UN, V1, V2 Configure the (TACACS+ and RADIUS) IP address
assignment for this user.
V1 holds the IP address in the following format:
xxx.xxx.xxx.xxx
V2 should be one of the following:
• ALLOC_METHOD_STATIC—The IP address in
V1 is assigned to the user in the format
xxx.xxx.xxx.xxx.
• ALLOC_METHOD_NAS_POOL—The IP pool
named in V1 (configured on the AAA client) will be
assigned to the user.
• ALLOC_METHOD_AAA_POOL—The IP pool
named in V1 (configured on the AAA server) will be
assigned to the user.
• ALLOC_METHOD_CLIENT—The dial-in client
will assign its own IP address.
• ALLOC_METHOD_AS_GROUP—The IP
address assignment configured for the group will be
used.
151 SET_CALLBACK_
NO
UN|GN, V1 Set the callback number for this user or group (TACACS+
and RADIUS). V1 should be one of the following:
• Callback number—The phone number the AAA
client is to call back.
• none—No callback is allowed.
• roaming—The dial-up client determines the
callback number.
• as group—Use the callback string or method defined
by the group.
Table F-4 Action Codes for Initializing and Modifying Access Filters (continued)
Action
Code Name Required Description
To Next Page
Loading...
