Cisco 7800 Series

New and Changed for Firmware Release 12.7(1)
Table 4: Cisco IP Phone 7800 and 8800 Series Accessories Guide Revisions for Firmware Release 12.7(1)
Updated SectionRevision
Updated sections:
• Cisco Headset Configuration on Cisco Unified
Communications Manager, on page 26
• Accessory Support for the Cisco IP Phone 7800 Series, on
page 1
• Accessory Support for the Cisco IP Phone 8800 Series, on
page 3
New sections:
• Headset Management on Older Versions of Cisco Unified
Communications Manager, on page 30
• Cisco Headset 700 Series Customization, on page 38
• Set the Cisco Headset 730 Noise Cancellation Level, on page
38
• Set the Cisco Headset 730 Sidetone Level, on page 39
• Set the Cisco Headset 730 General Settings, on page 39
• Reset the Cisco Headset 730 Settings, on page 40
• View the Cisco Headset 730 Details, on page 40
Cisco Headset 730 Support
Enable Electronic Hookswitch Control on Your Phone, on page
44
Updated for E-hook.
Erase All Bluetooth Pairings, on page 36Cisco Headset 500 Series Firmware Release 1.5 change
• Custom Background Images, on page 56
• Change the Wallpaper, on page 60
Updated for wallpaper support on key expansion modules
New Information for Firmware Release 12.6(1)
No accessories guide updates were required for Firmware Release 12.6(1).
Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager
6
Accessories Overview
New and Changed for Firmware Release 12.7(1)