Cisco 7800 Series Accessories Guide

"access": "Both",
"usageId": 35,
"value": 3
},
{
"name": "Audio Bandwidth",
"access": "Admin",
"usageId": 36,
"value": 0
},
{
"name": "Bluetooth",
"access": "Admin",
"usageId": 39,
"value": 0
},
{
"name": "DECT Radio Range",
"access": "Admin",
"usageId": 37,
"value": 0
}
{
"name": "Conference",
"access": "Admin",
"usageId": 41,
"value": 0
]
}
]
}
]
}
}
}
Step 3 Save the defaultheadsetconfig.json.
What to do next
Install the default configuration file.
Install the Default Configuration File on Cisco Unified Communications Manager
After you edit the defaultheadsetconfig.json file, install it on Cisco Unified Communications
Manager using the TFTP File Management tool.
Procedure
Step 1 From Cisco Unified OS Administration, choose Software Upgrades > TFTP File Management.
Step 2 Select Upload File.
Step 3 Select Choose File and navigate to the defaultheadsetconfig.json file.
Step 4 Select Upload File.
Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager
33
Headsets
Install the Default Configuration File on Cisco Unified Communications Manager

Cisco 7800 Series Specifications

General

Wireless	No
Video Support	No
PoE	Yes, 802.3af/at
Audio Codec Support	G.711, G.722, G.729, iLBC
Network Protocols	SIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features	802.1X, TLS, SRTP
Power Options	PoE
Headset Port	3.5mm
Buttons	Line keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
Bluetooth	No
Ethernet Switch	Yes, 2-port 10/100/1000
USB Port	Yes, for headset (7875)