EasyManuals Logo

Cisco 7800 Series Accessories Guide

Cisco 7800 Series
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
DescriptionNameCallout
Number
Three position switch:
Bluetooth: Slide to the top and hold to pair the
headset to the phone.
Power: Slide to the middle position to turn the
headset on. Slide down to turn the headset off.
Bluetooth and Power button
This is on the back of the left cup.
8
Third Party Headsets
Cisco performs internal testing of third-party headsets for use with Cisco IP Phones. But Cisco does not certify
or support products from headset or handset vendors. Check with the headset manufacturer to confirm whether
you can use it with your Cisco phone.
The Cisco IP Phone 7811 does not support a headset.
Note
Headsets connect to your phone using either the USB or the auxiliary port. Depending upon your headset
model, you have to adjust your phone's audio settings for the best audio experience, including the headset
sidetone setting.
If you have a third party headset, and you apply a new sidetone setting, then wait one minute and reboot the
phone so the setting is stored in flash.
The phone reduces some background noise that a headset microphone detects. You can use a noise canceling
headset to further reduce the background noise and improve the overall audio quality.
If you are considering a third part headset, we recommend the use of good quality external devices; for example,
headsets that are screened against unwanted radio frequency (RF) and audio frequency (AF) signals. Depending
on the quality of headsets and their proximity to other devices, such as mobile phones and two-way radios,
some audio noise or echo may still occur. Either the remote party or both the remote party and the Cisco IP
Phone user may hear an audible hum or buzz. A range of outside sources can cause humming or buzzing
sounds; for example, electric lights, electric motors, or large PC monitors.
Sometimes, use of a local power cube or power injector may reduce or eliminate hum.
Environmental and hardware inconsistencies in the locations where Cisco IP Phones are deployed mean that
no single headset solution is optimal for all environments.
We recommend that customers test headsets in the intended environment to determine performance before
making a purchasing decision to deploy on a large scale.
Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager
23
Headsets
Third Party Headsets

Table of Contents

Other manuals for Cisco 7800 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7800 Series and is the answer not in the manual?

Cisco 7800 Series Specifications

General IconGeneral
WirelessNo
Video SupportNo
PoEYes, 802.3af/at
Audio Codec SupportG.711, G.722, G.729, iLBC
Network ProtocolsSIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features802.1X, TLS, SRTP
Power OptionsPoE
Headset Port3.5mm
ButtonsLine keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
BluetoothNo
Ethernet SwitchYes, 2-port 10/100/1000
USB PortYes, for headset (7875)

Related product manuals