Cisco 7800 Series

DescriptionNameNumber
Use to place, answer, and manage your calls:
• Press once to place a call.
• Press once to answer an incoming call. Press twice to reject
an incoming call.
• Press once to put an active call on hold, and to answer an
incoming call.
• Press once to put an active call on hold.
• Press and hold to end a call.
Call button3
Cisco Headset 561 and 562 Buttons and LED
Your headset buttons are used for basic call features.
Figure 9: Cisco Headset 561 and 562 Headset Buttons
Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager
15
Headsets
Cisco Headset 561 and 562 Buttons and LED