Step 4 Navigate to the Product Specific Configuration Layout pane and set the fields.
Step 5 Check the Override Common Settings check box for any changed fields.
Step 6 Click Save.
Step 7 Click Apply Config.
Step 8 Restart the phone.
Headset Parameters on Cisco Unified Communications Manager
The following table describes the fields in the Product Specific Configuration Layout pane that control headset
use.
Table 19: Product Specific Configuration Fields for Headsets
Description and Usage GuidelinesDefaultField Type or
Choices
Field Name
Turns off the speakerphone and headset capability of
the phone.
UncheckedCheck boxDisable
Speakerphone
and Headset
Turns off the handset audio path.UncheckedCheckboxDisable Handset
This parameter is removed from Cisco
Unified Communications Manager
Software Release 12.5(1)SU2 and later.
Note
Enables users to remotely control basic IP phone
functionality from the wireless headset. Basic IP
phone functionality includes off-hook and on-hook,
ring indication, audio volume control, and mute.
To use a wireless headset, users connect a base station
to the auxiliary port. The base station communicates
with the wireless headset.
DisabledDisabled
Enabled
Wireless
Headset
Hookswitch
Control
Enables or disables the use of a Wideband Headset
on the phone. Used in conjunction with User Control
Wideband Headset.
For more information, see Set Up Wideband Codec,
on page 29.
EnabledDisabled
Enabled
Wideband
Headset
Allows the user to use the wideband codec for an
analog headset.
EnabledDisabled
Enabled
Wideband
Headset UI
Control
Enables the Cisco IP Phones 8861 and 8865 to connect
to the Wi-Fi network.
Phones that do not support this feature do not display
the field.
EnabledDisabled
Enabled
Wi-Fi
Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager
28
Headsets
Headset Parameters on Cisco Unified Communications Manager
To Next Page
Loading...
Need help?
General
