4-28
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages
Configuring Trace Settings
Step 7 Click Save to make the change.
Related Topics
• Accessing the Phone Web Page, page 4-3
• Configuring Network Profiles, page 4-8
• Configuring USB Settings, page 4-26
• Using System Settings, page 4-34
Ta b l e 4-8 Trace Settings Area Items
Item Description
General
Number of Files Choose the number of trace files that the phone saves, from 2-10 files.
File Size Choose the File size for the trace file that is saved. The file size range
is 50K to 250K.
Remote Syslog Server
Enable Remote Syslog Set up a remote server to store trace logs
IP Address—Enter server IP address
Port—Enter a port number (514, 1024-65535)
Module Trace Level
Kernel Operating System data
Wireless LAN Driver Channel scanning and authentication
Wireless LAN Manager Channel scanning and authentication
Configuration Phone configuration data
Call Control Cisco Unified Communications Manager data
Network Services DHCP, TFTP, CDP data
Security Subsystem Application level security data
User Interface Key strokes, softkeys, MMI data
Wireless Channel scanning, authentication data
Audio System RTP, SRTP, RTCP, DSP data
System Firmware, upgrade data
Advanced Trace Settings
Preserve Logs True—Save trace logs after powering off the phone
False—Delete trace logs
Reset Trace Settings upon
Reboot
You may enable debugging by configuring various settings on the
Trace Configuration. These options determine how trace settings are
handled when you reboot:
• Yes—Default value. Settings will be reset to the default values
upon reboot.
• No—Trace settings will not reset upon reboot.
To Next Page
Loading...
