Cisco 7925G - Unified Wireless IP Phone VoIP - Viewing Model Information

8-7
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 8 Viewing Security, Device, Model, Status, and Call Statistics Information on the Phone
Viewing Model Information
Related Topics
• Viewing Security Information, page 8-1
• Viewing Model Information, page 8-7
• Viewing the Phone Status Menu, page 8-8
Viewing Model Information
You can view the Model Information screen on the Cisco Unified Wireless IP Phone 7925G to see
information about the hardware and software.
To view this screen, follow these steps:
Procedure
Step 1 Choose SETTINGS > Model Information.
Step 2 Use the Navigation button to scroll through the items in the Model Information screen.
Step 3 Table 8-3 describes the items that appear in this screen.
Step 4 To exit the Model Information screen, press the Back softkey.
Web Access Indicates web access capability for the phone.
• Disabled—No user options web page access
• ReadOnly—Can view information only
• Full—Can use configuration pages
You configure web access in Cisco Unified Communications Manager
Administration.
QoS Information
DSCP for Call Control Differentiated Services Code Point (DSCP) IP classification for call
control signaling.
DSCP for Configuration DSCP IP classification for any phone configuration transfer.
DSCP for Services DSCP IP classification for phone-based service.
Table 8-2 Device Information Categories and Items (continued)
Item Description
Ta b l e 8-3 Model Information Screen Items
Item Description
Model Number Model number of the phone.
MAC Address MAC address of the phone.
App Load ID Identifier of the factory-installed load running on the phone.
Serial Number Serial number of the phone.