Cisco 7925G - Unified Wireless IP Phone VoIP User Manual

8-9
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 8 Viewing Security, Device, Model, Status, and Call Statistics Information on the Phone
Viewing the Phone Status Menu
– Preserve logs
– Preserve trace levels
Viewing the Status Messages
You can use the Settings menu and Status menu to view status messages for the Cisco Unified Wireless
IP
Phone 7925G. The Status Messages screen displays up to 10 of the most recent status messages that
the phone has generated.
You can access this screen at any time, even if the phone has not finished starting up. Table 8-5 describes
the status messages that might appear. This table also includes actions you can take to address indicated
errors.
To view status messages, follow these steps:
Step 1 Choose Settings > Status.
Step 2 Select Status Messages.; the list of the status messages displays.
To erase the messages, press the Clear softkey
Step 3 To exit the screen, press the Back softkey.

Cisco 7925G - Unified Wireless IP Phone VoIP Specifications

General

Wireless	802.11a/b/g
Protocols	SIP, SCCP
Headset Jack	2.5 mm
Speakerphone	Yes
Battery Type	Lithium-ion
Compatibility	Cisco Unified Communications Manager
Display	2 inch color display
Security	WPA, WPA2
Battery	Lithium-ion battery
Voice Codecs	G.711a, G.711u, G.729a
Operating Temperature	32 to 104°F (0 to 40°C)