5-4
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 5 Configuring Settings on the Cisco Unified Wireless IP Phone 7925G
Configuring Network Profile Settings
Step 6 Press Options > Save to complete the name change.
Guidelines for Editing Settings in the Network Profile
When you edit the Network Profile, you can enter characters, numbers, and special characters from the
phone keypad. Use the numeric keys on the keypad to enter the number or the assigned characters. Each
press moves to another character choice. Use the following guidelines when entering values:
• Enter characters—Press the numeric key to move to the desired character (lowercase, then upper
case).
• Enter numbers—Press the numeric key to enter the number.
• Delete the last character—Press << to delete the last character or number in the string.
• Enter a space—Press to enter a space between characters.
• Enter a dot—Press to enter a dot between numbers.
• Enter special characters and symbols—Press one of the following keys to display and enter these
characters:
–
Press to enter * - / = \ : ;
–
Press to enter a space + , . ‘ “ | _ ~ ’
–
Press to enter # ? ( ) [ ] { }
–
Press to enter ! @ < > $ % ^ &
• Save an entry—Press Options > Save.
• Cancel editing mode—Press Options > Cancel as needed to return to the menu option or main
screen.
Related Topics
• Accessing Network and Phone Settings, page 5-1
• Configuring DHCP Settings, page 5-6
• Configuring an Alternate TFTP Server, page 5-7
• Configuring Wireless Settings for the Network Profile, page 5-8
Changing Network Configuration Settings
After accessing a network profile, you can use Table 5-1 for descriptions and reference information for
network profile settings.
Ta b l e 5-1 Network Configuration Settings
Network Setting Description For More Information, See...
DHCP Server IP address of the DHCP server from which the
phone obtains its IP address
Configuring DHCP Settings,
page 5-6
MAC Address Unique MAC address of the phone Display only, cannot configure