7-20
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 7 Configuring Features, Templates, Services, and Users
Managing the User Options Web Pages
To add users individually from Cisco Unified Communications Manager Administration for 4.x,
choose User > Add a New User.
Refer to “Adding a New User” chapter in Cisco Unified Communications Manager Administration
Guide for more information about adding users. Refer to Cisco Unified Communications Manager
System Guide for details about user information.
• To add users in batches, use the Bulk Administration Tool. This method also enables you to set an
identical default password for all users.
For detailed information, refer to Bulk Administration Tool User Guide (Cisco Unified
Communications Manager 4.1 or later) or Cisco Unified Communications Manager Bulk
Administration Guide (Cisco Unified Communications Manager 5.0 or later).
Related Topics
• Specific Configuration Options for the Cisco Unified Wireless IP Phone 7925G, page 7-13
• Configuring Softkey Templates, page 7-16
• Configuring Corporate and Personal Directories, page 7-18
• Adding Users to Cisco Unified Communications Manager, page 7-19
• Creating Custom Phone Rings, page 7-21
Managing the User Options Web Pages
From the User Options web page, users can customize and control several phone features and settings.
For detailed information about the User Options web pages, refer to Cisco Unified Wireless IP
Phone
7925G Guide.
Giving Users Access to the User Options Web Pages
Before a user can access the User Options web pages, you must use Cisco Unified Communications
Manager Administration to add the user to a standard Cisco Unified Communications Manager end user
group. To do so, choose User Management > User Group. You must also associate appropriate phones
with the user.
To perform this procedure, do the following:
Cisco Unified Communications Manager Administration for Release 5.x and Later
Step 1 Choose User Management > End User.
Step 2 Add the username.
Step 3 Add the phone.
Step 4 Associate the phone to the user.
Step 5 Add the user to a user group.
For Cisco Unified Communications Manager Administration for Release 4.x, refer to Cisco Unified
Communications Manager Administration Guide, “End User Configuration” section.
To Next Page
Loading...
Need help?
General
