D-7
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Appendix D Checklist for Deploying the Cisco Unified Wireless IP Phone 7925G
Installing the Cisco Unified Wireless IP Phone 7925G
Installing the Cisco Unified Wireless IP Phone 7925G
Table D-3 provides an overview and checklist of installation tasks for the Cisco Unified Wireless
IP Phone 7925G. The list presents a suggested order to guide you through the phone installation. Some
tasks are optional, depending on your system and user needs. For detailed procedures and information,
refer to the sources in the list.
Ta b l e D-3 Checklist for Installing the Cisco Unified Wireless IP Phone 7925G
Task For More Information
1. Assemble the phone components and charge the battery. See Installing the Cisco Unified Wireless IP
Phone 7925G, page 1-15.
2. Configure the network profile by using the USB cable and the
Cisco
Unified Wireless IP Phone 7925G web page.
See Accessing the Web Page for a Phone, page 9-1.
3. Configure the phone settings by using the Settings menu on the
phone.
See Changing Phone Settings, page 5-10.
4. Power on the phone and monitor the phone startup process. See Understanding the Phone Startup Process,
page 3-17.
See Resolving Startup and Connectivity Problems,
page 10-1
5. Make calls with the wireless IP phone. Refer to the Cisco Unified Wireless
IP
Phone7925Guide.
See Resolving Voice Quality and Roaming,
page 10-8
6. Provide information to end users about how to use their phones
and how to configure their phone options.
See Appendix A, “Providing Information to Users By
Using a Website.”
To Next Page
Loading...
