CHAPTER
7-1
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
7
Configuring Features, Templates, Services, and
Users
This chapter provides an overview of the feature configuration and setup, softkey template modification,
services set up, and user assignment in Cisco Unified Communications Manager Administration.
Cisco
Unified Communications Manager documentation provides detailed instructions for these
procedures.
This chapter includes the following sections:
• Configuring Cisco Unified Wireless IP Phones in Cisco Unified Communications Manager,
page 7-1
• Telephony Features Available for the Phone, page 7-2
• Specific Configuration Options for the Cisco Unified Wireless IP Phone 7925G, page 7-13
• Configuring Softkey Templates, page 7-16
• Modifying Phone Button Templates, page 7-17
• Setting Up Services, page 7-17
• Configuring Corporate and Personal Directories, page 7-18
• Adding Users to Cisco Unified Communications Manager, page 7-19
• Managing the User Options Web Pages, page 7-20
• Creating Custom Phone Rings, page 7-21
For suggestions about providing users with information for using the phone and features, see
Appendix A, “Providing Information to Users By Using a Website.” For information about setting up
phones in non-English environments, see Appendix B, “Supporting International Users.”
Configuring Cisco Unified Wireless IP Phones in Cisco Unified
Communications Manager
To provide telephony call routing and call–control features for the Cisco Unified Wireless
IP
Phone 7925G, you must use Cisco Unified Communications Manager Administration. For
instructions about adding these devices, refer to the “Cisco
Unified IP Phone Configuration” chapter in
the Cisco Unified Communications Manager Administration Guide.
To Next Page
Loading...
Need help?
General
