Cisco 7925G - Unified Wireless IP Phone VoIP - Updating Configuration Files

6-5
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 6 Configuring the Phone Using the Wavelink Avalanche Server
Updating Configuration Files
To install the phone CU, follow these steps:
Procedure
Step 1 Launch the Wavelink Avalanche Management Console and connect to the agent.
Step 2 Choose Software Management > Install Software Package.
Step 3 Browse to the location of the .ava file containing the Cisco Unified Wireless IP Phone CU and select it.
Step 4 Click New and enter the software collection name under which the phone configuration files will be
added.
Step 5 Follow the instructions on the wizard to complete the installation.
Step 6 When the installation has completed, expand the software collection name on the left pane. The phone
CU file name 7925CU appears with a red “x” (disabled) next to it.
Step 7 Right-click 7925CU and choose Enable Package.
Note The installation is complete. As an option, you can perform the following additional steps to
configure the selection criteria so you can easily apply changes to a device group.
Step 8 Right-click the software collection (containing the phone CU) and choose Settings.
Step 9 Click the button at right of the Selection Criteria box to launch the Selection Criteria Wizard.
Step 10 Select an item from the Source Properties list on the left, and enter a value in the Selection Expression
text box.
Step 11 Repeat the previous step for each property and value you wish to include. When finished, click Compile,
then click Test Expression.
Step 12 Review the list displayed under Matching Clients to ensure the selection criteria have been met. Click
Apply, then click OK.
Note For more information, see the Wavelink Avalanche Management Console documentation.
Updating Configuration Files
You can update a phone configuration file using the Cisco Unified Wireless IP Phone 7925G CU
installed on a Wavelink Avalanche Management Console.
Table 6-2 lists the configuration file settings.
Ta b l e 6-2 Configuration File Settings
Setting For more information, see...
Profile Settings Configuring Profile Settings, page 6-6
WLAN Settings
Network Settings