5-7
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 5 Configuring Settings on the Cisco Unified Wireless IP Phone 7925G
Configuring Network Profile Settings
Configuring an Alternate TFTP Server
If you use DHCP to direct the Cisco Unified Wireless IP Phone 7925Gs to a TFTP server, you can also
assign an alternative TFTP server to some phones instead of the one assigned by DHCP.To assign an
alternate TFTP server to a phone, follow these steps:
Procedure
Step 1 Choose SETTINGS > Network Profiles.
Step 2 To select the profile name that you want to configure, scroll to the item and then press the Select button.
Step 3 Enter **# to unlock the profile and press Edit.
Step 4 Select Network Configuration.
Step 5 Scroll to Alternate TFTP and press Yes.
Step 6 Scroll to TFTP Server 1 and press Select.
Step 7 In the New TFTP Server 1: field, enter the IP address for the server.
See Table 5-2 for descriptions of these fields.
For information about entering values, see the “Guidelines for Editing Settings in the Network Profile”
section on page 5-4.
Step 8 Press Options > /Validate to save the entry or press Cancel.
Changing the Cisco Discovery Protocol Settings
Some network devices do not use Cisco Discovery Protocol (CDP).
To change whether the phone transmits CDP packets and settings associated with CDP, follow these
steps in Cisco Unified Communications Manager Administration:
Procedure
Step 1 Choose Device > Phone.
Step 2 Click Find and locate the phone in the displayed list.
Domain Name Identifies the Domain Name System (DNS) domain in which the
phone resides.
DNS Server 1
DNS Server 2
If the system is configured to use host names for servers instead of IP
addresses, identify the primary and secondary DNS server to resolve
host names.
Alternate TFTP server Identifies whether you are using an alternate TFTP server. See
Configuring an Alternate TFTP Server, page 5-7.
TFTP Server 1 Identifies the TFTP server that the phone uses to obtain configuration
files.
Table 5-2 Static Settings When DHCP is Disabled (continued)
Static Setting Description
To Next Page
Loading...
Need help?
General
