Cisco 7925G - Unified Wireless IP Phone VoIP - Defining Custom Names and Custom Values on the Phone; Defining Custom Parameters from the Phone Web Page; Installing the Cisco Unified Wireless IP Phone 7925 G CU

6-4
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 6 Configuring the Phone Using the Wavelink Avalanche Server
Installing the Cisco Unified Wireless IP Phone 7925G CU
– Defining Custom Names and Custom Values on the Phone, page 6-4
– Defining Custom Parameters from the Phone Web Page, page 6-4
Defining Custom Names and Custom Values on the Phone
To define the CustomName and CustomValue fields from the phone, follow these steps:
Procedure
Step 1 On the main phone screen, choose SETTINGS > System Configuration > Wavelink.
Step 2 Unlock the phone by pressing **#.
Step 3 Scroll to a CustomName, enter an attribute name (for example, “User”), and click Save.
Note Only alphanumeric characters are allowed in the CustomName field.
Step 4 Scroll to CustomValue and enter a value for the corresponding CustomName (for example, “Admin”),
and click Save.
You can define up to four pairs of custom parameters.
Defining Custom Parameters from the Phone Web Page
To define customer parameters from the phone web page, follow these steps:
Procedure
Step 1 From the phone web page, choose Wavelink Settings.
Step 2 In the Wavelink Custom Parameters section, enter values in the Name and Value fields. You can define
up to four pairs of custom parameters.
Note Do not use spaces in the Name field.
Installing the Cisco Unified Wireless IP Phone 7925G CU
The Cisco Unified Wireless IP Phone 7925G CU file is provided by Cisco in the .ava file format.
Note The phone CU must be installed on the Wavelink Avalanche Management Console.