Cisco 7925G - Unified Wireless IP Phone VoIP - Configuring Settings on the Cisco Unified Wireless IP Phone 7925 G; Accessing Network and Phone Settings

CHAPTER
5-1
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
5
Configuring Settings on the Cisco Unified
Wireless IP Phone 7925G
This chapter describes the available configuration settings on the Cisco Unified Wireless
IP
Phone 7925G. It contains the following sections:
• Accessing Network and Phone Settings, page 5-1
• Configuring Network Profile Settings, page 5-2
• Changing Phone Settings, page 5-10
• Configuring the Security Certificate on the Phone, page 5-12
• Changing the USB Configuration, page 5-13
Accessing Network and Phone Settings
You can view and change many network configuration options and phone settings for the Cisco Unified
Wireless IP
Phone 7925G by using the Settings menu.
Note You can control whether a Cisco Unified Wireless IP Phone 7925G has access to the Settings menu from
the Cisco Unified
Communications Manager Administration Phone Configuration page. Use the
Settings Access field in the Product Specific Configuration section of the phone configuration page. For
more information, see the
“Specific Configuration Options for the Cisco Unified Wireless
IP Phone 7925G” section on page 7-13.
To access the Settings menu, follow these steps:
Procedure
Step 1 Press on the Navigation button for (Settings).
Step 2 Use these menu options to view or change settings:
• Phone Settings
• Network Profiles
• System Configuration
• Device Information