D-6
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Appendix D Checklist for Deploying the Cisco Unified Wireless IP Phone 7925G
Configuring the Cisco Unified Wireless IP Phone 7925G in Cisco Unified Communications Manager
Step 6
Assign line view speed-dial numbers (optional).
Adds line view speed-dial numbers.
Note Configuring and using line view speed-dial
numbers are different from speed-dial hot keys
that are set up using the Phone Book feature and
stored locally on the wireless IP phone.
Note Users can change line view speed-dial settings
on their phones by using Cisco Unified CM User
Options.
Refer to Cisco Unified CallManager Administration
Guide, “Cisco Unified
IP Phone Configuration”
chapter, “Configuring Speed-Dial Buttons” section.
Refer to Cisco Unified Wireless IP Phone7925G
Administration Guide for Cisco Unified
Communications Manager 4.3, 5.1, 6.0, 6.1(1) and
7.0(1), “Advanced Call Handling” chapter, “Speed
Dialing” section.
See Telephony Features Available for the Phone,
page 7-2
Step 7
Configure Cisco Unified IP Phone services and assign
services (optional).
Provides IP Phone services.
Note Users can add or change services on their
phones by using the Cisco Unified CM User
Options.
Refer to Cisco Unified CallManager Administration
Guide, “Cisco Unified
IP Phone Services
Configuration” chapter.
See Setting Up Services, page 7-17.
Step 8
Add user information by configuring required fields.
Required fields are indicated by an asterisk (*); for
example, User ID and last name.
Note Assign a password (for User Options web pages)
and PIN (for Extension Mobility and Personal
Directory)
Adds user information to the global directory for Cisco
Unified
Communications Manager.
Refer to Cisco Unified CallManager Administration
Guide, “End User Configuration” chapter.
See Adding Users to Cisco Unified Communications
Manager, page 7-19.
Step 9
Associate a user to a user group.
Assigns users a common list of roles and permissions
that apply to all users in a user group. Administrators
can manage user groups, roles, and permissions to
control the level of access (and, therefore, the level of
security) for system users.
Note Applicable to Cisco Unified Communications
Manager Administration Release 5.x and later.
Refer to the Cisco Unified Communications Manager
Administration Guide:
• “End User Configuration” chapter, “End User
Configuration settings” section
• “User Group Configuration” chapter, “Adding
Users to a User Group” section
Step 10
Associate a user with a phone. This step is optional if
you do not want users to have access to User Options.
Provides users with control over their phone such as
forwarding calls or adding line view speed-dial numbers
or services.
Note Some phones, such as those used by multiple
users, do not have an associated user.
Refer to Cisco Unified CallManager Administration
Guide, “End User Configuration” chapter, “Associating
Devices to a User” section.
Table D-2 Checklist for Configuring the Cisco Unified Wireless IP Phone 7925G in Cisco Unified CallManager
Configuration Step and Purpose For More Information
To Next Page
Loading...
