Cisco 7925G - Unified Wireless IP Phone VoIP - Page 112

4-36
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages
Using System Settings
Step 9 The encrypted configuration file contains these settings:
• Profile Name
• SSID
• Single Access Point
• Call Power Save Mode
• 802.11 Mode
• WLAN Security
• Authentication Method
• User name
• Password
• Passphrase
• Encryption keys
• Use DHCP to get IP address and DNS servers
• Static Settings (if configured)
– IP Address
– Subnet Mask
– Default Router
– Primary DNS Server
– Secondary DNS Server
• Use DHCP to get TFTP Server
• Static TFTP Settings (if configured)
– TFTP Server 1
– TFTP Server 2
Advanced Network Profile Settings
• Minimum PHY rate
• Surplus Bandwidth
• 802.11G Power Settings (checked ones)
• 802.11A Power Settings (checked ones)
USB Settings (use one of these)
• Obtain IP address from server
or
• Static settings (if configured)
– IP address
– Subnet Mask
Trace Settings
• Number of Files
• Syslog Server (enabled/disabled)