5-11
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 5 Configuring Settings on the Cisco Unified Wireless IP Phone 7925G
Changing Phone Settings
To access the Phone Settings menu options on a Cisco Unified Wireless IP Phone 7925G, follow these
steps:
Procedure
Step 1 Choose SETTINGS > Phone Settings.
Step 2 Press the number for the setting that you want to configure (or you can scroll to the setting and press the
Select button).
Step 3 Press the number for the setting category.
Step 4 Press the number for the setting that you want to change.
For descriptions of the settings, see Table 5-4. For specific instructions to change these settings, refer to
“Using Phone Settings,” in the Cisco Unified Wireless IP Phone7925G Guide.
Ta b l e 5-4 Configurable Settings for the Phone Sounds, Display, and Keypad
Phone Setting Description
Sound Settings
Ring Tone Assigns the ring tone for each line on the phone.
Volumes
Ring Sets the ring volume level for the phone.
Speaker Sets the volume for the speaker.
Handset Sets the volume for the handset.
Headset Sets the volume for the headset.
Alert Pattern Sets the ring, vibrate, or combination to alert the user of an incoming
call.
Ring Output Sets the phone to ring through speaker, headset, or both speaker and
headset.
Display Settings
Display Brightness Sets the brightness for the phone screen.
Display Timeout Sets the length of time for the phone screen to display before turning
off or disables the timer so screen always displays.
LED Coverage Indicator Enables or disables the LED blink to indicate that the phone is in
service and within the coverage area.
Keypad Settings
Any Key Answer Enables or disables using any key or button on the phone to answer a
ringing call.
Keypad Auto Lock Sets the length of time for the keypad to lock automatically after no
keypad activity or disables auto lock.
Keypad Tone Enables or disables tones for keypad presses.
To Next Page
Loading...
