7-3
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 7 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Barge Allows a user to join a non-private call on a shared phone
line. Barge features include cBarge, Barge, and Single
Button Barge.
• cBarge adds a user to a call and converts it into a
conference, allowing the user and other parties to
access conference features.
• Barge adds a user to a call but does not convert the call
into a conference.
• Single Button Barge enables users to Barge or cBarge
into a remote-in-use call on a shared line.
The phones support Barge in two conference modes:
• Built-in conference bridge at the target device (the
phone that is being barged). This mode uses the Barge
softkey.
• Shared conference bridge. This mode uses the cBarge
softkey.
Note The Barge and Privacy features work together. See
Privacy, page 7-11 for more information.
For more information, refer to:
• Cisco Unified Communications
Manager Administration Guide,
“Device Pool Configuration” chapter.
• Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
• Cisco Unified Communications
Manager Features and Services
Guide, “Barge and Privacy” chapter.
Block external to
external transfer
Prevents users from transferring an external call to another
external number.
For more information, refer to Cisco
Unified Communications Manager
Features and Services Guide, “External
Call Transfer Restrictions” chapter.
Busy Lamp Field
(BLF) speed dial
Allows a user to monitor the call state of a directory
number (DN) associated with a speed-dial button. The
available states are: alerting, idle, busy, and DND. During
the alerting state, call pickup capability is enabled.
Note This feature is not supported in Cisco Unified
Communications Manager Release 4.x.
For more information, refer to Cisco
Unified Communications Manager
Features and Services Guide, “Presence”
chapter.
Call Back Provides users with an audio and visual alert on the phone
when a busy or unavailable party becomes available.
For more information, refer to:
• Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
• Cisco Unified Communications
Manager Features and Services
Guide, “Call Back” chapter.
Table 7-1 Telephony Features for the Cisco Unified Wireless IP Phone 7925G (continued)
Feature Description Configuration Reference
To Next Page
Loading...
