Cisco 7925G - Unified Wireless IP Phone VoIP - Page 188

9-4
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 9 Monitoring the Cisco Unified Wireless IP Phone Remotely
Network Configuration Information
Communications Manager Information
CallManager 1–5 Host names or IP addresses, in prioritized order, of the
Cisco
Unified Communications Manager servers with which the
phone can register. An item can also show the IP address of an SRST
router that is capable of providing limited
Cisco
Unified Communications Manager functionality, if such a
router is available.
Each available server shows the Cisco Unified Communications
Manager server IP address and one of the following states:
• Active—Cisco Unified Communications Manager server from
which the phone is currently receiving call-processing services.
• Standby—Cisco Unified Communications Manager server to
which the phone switches if the current server becomes
unavailable.
• Blank—No current connection to this
Cisco
Unified Communications Manager server.
Table 9-2 Network Information Items (continued)
Item Description