Cisco 7925G - Unified Wireless IP Phone VoIP - Page 239

Index
IN-5
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
O
on hook call transfer 7-11
online help, using A-3
open authentication, description 2-16
orthogonal frequency division multiplexing (OFDM) 2-3,
2-6
other group pickup 7-11
P
padlock icon 1-12
personal directories, configuring 7-19
phone book, using 4-29
phone mode
active 3-16
standby 3-17
phone operation for users A-1
phone resets, resolving problems 10-8
phones, installing 1-15
phone settings
access restrictions 5-1, 5-2, 5-10
menu 5-11
phone upgrade web page 4-37
phone web page
about 4-1, 9-1
accessing 4-5, 9-1
change password 4-38
device information 9-6
installing drivers 4-1
network configuration 9-3
network statistics 9-2, 9-9
phone upgrade 4-37
profile settings 4-8
summary information 4-7, 9-2
system settings 4-34
trace logs 4-34
trace settings 4-27
USB settings 4-26
plug-socket warning 3-5
powering on phone 3-15
power outage warning 3-5
power supply
figure, connected 3-11
power supply replacement caution 3-7
power supply warning 3-6
presence-enabled directories 7-11
primary DNS server 2-16, 4-24, 5-7
primary gateway 2-15, 4-24, 5-6
primary TFTP server 5-7
privacy 7-11
profile settings web page 4-8
protected call 1-13
description 1-13
Protected Calls 1-13
Push to Talk service 7-11
Q
QBSS, description 2-12
QDID 1-2, 2-8
QoS basis service set, See QBSS
QRT softkey 7-12
Quality of Service (QoS) 2-12
Quality Reporting Tool (QRT) 7-12
R
RADIUS server authentication, description 2-17, 2-18
real-time control protocol, See RTCP
real-time transport protocol, See RTP
received signal strength indicator, See RSSI
redial 7-12
resetting, phones 10-9
resolving startup problems 10-1 to 10-7
resolving voice quality problems 10-8 to 10-12
ring activity 7-12
ringlist.xml 7-21