Cisco 7925G - Unified Wireless IP Phone VoIP - Page 243

Index
IN-9
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
for power outages 3-5
for power supply 3-6
for short circuit protection 3-6
for telephone receiver 3-6
translations 3-5
Wavelink software, using 4-29, 6-1
WDS, wireless domain server 2-8
web page
configuring phone settings 4-1
WEP encryption, description 2-18
WEP key
setting up encryption 4-16
Wi-Fi (802.11b) 2-3
wireless domain server (WDS) 2-8
wireless IP phone
adding manually to Cisco Unified Communications
Manager
3-4
adding to Cisco Unified Communications
Manager
3-2
adding using auto-registration 3-3
adding using auto-registration with TAPS 3-3
adding using BAT 3-4
battery 3-7
configuration file 2-14
feature overview 1-6
figure 1-4
keys 1-4
phone modes, active and standby 3-16
powering on 3-15
registering 3-2
registering with Cisco Unified Communications
Manager
3-3, 3-4
supported networking protocols 2-9
troubleshooting 10-1
troubleshooting tips 10-14
wireless IP phone, See also Cisco Unified Wireless IP
Phone
wireless local area network, See WLAN
wireless network settings
authentication 5-9
SSID 5-9
WLAN
components 2-9
security 2-16
voice quality 2-12
WLAN configuration menu 5-8
WLSM, wireless LAN services module 2-7
WPA
encryption with TKIP, description 2-18
WPA authentication, description 2-18
WPA-pre-shared key authentication, description 2-16
X
XMLDefault.cnf.xml configuration file 2-14