Contents
v
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Battery Safety Notices 3-6
Installing the Cisco Unified Wireless IP Phone 7925G 3-7
Providing Power to the Phone 3-7
Installing or Removing the Phone Battery 3-8
Using the Power Supply to Charge the Phone Battery 3-11
Using the USB Cable and PC to Charge the Battery 3-12
Configuring Wireless LAN Settings for the Cisco Unified Wireless IP Phone 7925G 3-13
Cisco Unified Wireless IP Phone 7925G Web Pages 3-13
Network Profile Menu on the Cisco Unified Wireless IP Phone 7925G 3-13
Using a Headset 3-13
Connecting Headsets 3-14
Using Bluetooth Wireless Headsets 3-14
Audio Quality Subjective to the User 3-15
Using External Devices with Cisco Unified IP Phones 3-15
Powering On the Cisco Unified Wireless IP Phone 7925G 3-15
Active and Standby Phone Modes 3-16
Active Mode 3-16
Standby Mode 3-17
Understanding the Phone Startup Process 3-17
CHAPTER
4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages 4-1
Setting Up Your PC to Configure the Phones 4-1
Installing the USB Drivers 4-2
Configuring the USB LAN on the PC 4-2
Accessing the Phone Web Page 4-3
Using the USB Cable to Configure Phones 4-4
Updating the Phones Remotely 4-4
Setting Configuration Privileges for the Phone Web Page 4-4
Accessing the Configuration Web Page for a Phone 4-5
Summary Information on the Home Web Page 4-7
Configuring Network Profiles 4-8
Network Profile Settings 4-8
Configuring Wireless Settings in a Network Profile 4-12
Configuring Wireless LAN Security 4-13
Configuring the Authentication Mode 4-14
Setting the Wireless Security Credentials 4-15
Configuring the Username and Password 4-15
Configuring the Pre-shared Key 4-15
Setting Wireless Encryption 4-16
To Next Page
Loading...
Need help?
General
